Host Pool VM Deployment
Nerdio Manager enables you to customize the way session host VMs are deployed in a host pool. This is a feature-rich facility that is detailed below.
To configure host pool VM deployment:
Locate the host pool you wish to work with.
From the action menu, select Properties > VM Deployment.
Enter the following information:.
Set time zone: Select this option, and from the drop-down list select the time zone, to set the time zone on the VM when it is provisioned.
Enable time zone redirection: Select this option to allow users to see their local device's time zone inside of their session.
Enable Accelerated Networking for VMs that support it: Select this option to enable Accelerated Networking, if available.
Note: The Azure VM accelerated networking feature is available in some of the larger Azure VMs. This feature is useful for enterprise organizations and IT professionals who need to deploy, manage, and optimize large amounts of Azure Virtual Desktops. It speeds up networking performance of individual VMs.
If this feature is not supported on your Azure VM, it is not enabled. See this Microsoft document for more information.
Note: GPU drivers can be installed on N-series VMs.
Distribute VMs across Availability Zones: Select this option to automatically distribute newly created or re-imaged session host VMs across Availability Zones in the selected Azure region.
Note: See this Microsoft article for more details about Azure Regions and Availability Zones.
Place VMs on Dedicated Hosts: Select this option to place the VMs to physical servers.
Note: See this Microsoft article for more details about Azure dedicated hosts.
Dedicated Host Group: From the drop-down list, select the dedicated host group.
Dedicated Host: From the drop-down list, select the dedicated host for the VMs.
Note: If Automatic assignment is selected, the VMs are automatically assigned to the appropriate hosts when powered on.
Deallocate powered off but not deallocated VMs: Select this option to have a periodic task check if any session host VMs are in a powered off (but not deallocated) state and automatically deallocate them to save on Azure compute costs.
Install MSIX app attach certificates: Select this option to install all stored certificates if the MSIX App Attach packages are added to this host pool.
Install Applications: Select this option to install applications configured by recurrent UAM policies before moving the host out of drain mode.
Restart VM after deployment: Select this option to restart the VM after it is created.
Note: If certain extensions are installed during deployment (FSLogix, Sepago, Virtual Desktop Optimizations, or User Sessions Time Limits), the VM is automatically rebooted even if this option is not selected.
Always prompt for password: Select this option to always prompt the user for a password.
Note: This policy setting specifies whether Remote Desktop Services always prompts the client for a password upon connection. You can use this setting to enforce a password prompt for users signing in to Remote Desktop Services, even if they already provided the password in the Remote Desktop Connection client.
By default, Remote Desktop Services allows users to automatically sign in by entering a password in the Remote Desktop Connection client.
If you select this option, users cannot automatically sign in to Remote Desktop Services by supplying their passwords in the Remote Desktop Connection client. They are prompted for a password to sign in.
If you do not select this option, users can always sign in to Remote Desktop Services automatically by supplying their passwords in the Remote Desktop Connection client.
Enable encryption at host: Select this option so that data stored on the session host VMs is encrypted at rest and flows encrypted to the Storage service.
This setting only applies to newly created desktops.
See this Microsoft article to learn more about the encryption at host feature.
Register: If necessary, select this option to register the feature "microsoft.compute/encryptionathost" with the linked subscriptions that do not have this feature.
Nerdio Manager supports the use of both platform-managed keys (default) and customer-managed keys (Encryption Sets). If you are using Encryption Sets, these must be created in the same region as the target session host VMs.
If this subscription was registered in Nerdio Manager using the "logged in user" option, you must use an account with Subscription Owner permissions to register these features.
If this feature is not registered, hosts in the linked subscriptions would not have encrypted data.
This is a sample pop-up warning message:
Enable boot diagnostics: Select this option to apply the Boot Diagnostics feature to desktops in this pool.
Note: This setting only applies to newly created desktops.
Storage accounts for boot data: Optionality, from the drop-down list, select an available storage account to be used to store boot data.
Note: By default, Azure uses an automatic managed storage account for screen shots and other data. To use the default setting, leave this empty.
Enable watermarking: Select this option to enable watermarking.
Note: Watermarking helps prevent sensitive information from being captured on client endpoints. When you enable watermarking, QR code watermarks appear as part of the remote desktops. The QR code contains the connection ID of a remote session that admins can use to trace the session.
Scale: Select the scale, which is the size in pixels of each QR code dot. This value determines the number of squares per dot in the QR code.
Opacity: Select the opacity, which is how transparent the watermark is, in percent, where 0 is fully transparent.
Width factor: Select the width factor which determines the distance between the QR codes in percent. When combined with the height factor, a value of 0 would make the QR codes appear side-by-side and fill the entire screen.
Height factor: Select the scale, which determines the distance between the QR codes in percent. When combined with the width factor, a value of 0 would make the QR codes appear side-by-side and fill the entire screen.
Enable Hibernation: Select this option to save time and money by deallocating your virtual machine and saving the contents of its RAM to the root volume, allowing you to resume from where you left off when your VM restarts.
Trusted Launch: Toggle on this option to enable Trusted Launch.
Note: Azure offers Trusted Launch as a seamless way to improve the security of Generation 2 VMs. Trusted Launch protects against advanced and persistent attack techniques. Trusted Launch is composed of several coordinated infrastructure technologies that can be enabled independently. Each technology provides another layer of defense against sophisticated threats. See this Microsoft document for more information..
Secure Boot: Select this option to enable Secure Boot, which helps protect your VMs against boot kits, rootkits, and kernel-level malware.
vTPM: Select this option to enable Virtual Trusted Platform Module (vTPM), which is TPM 2.0 compliant and validates your VM boot integrity apart from securely storing keys and secrets.
Allow non-admin users to shadow sessions: Toggle on this option to enable selected non-admin users or groups to shadow sessions.
Note: Session shadowing is only available with multi-session versions of Windows OS. This feature does not work with Windows 10 Enterprise (single session).
User or Group Name: From the drop-down list, select the users or groups to allow to shadow sessions.
Run scripted actions when...: Toggle on the desired run script options.
For each option, enter the following information:
Script: From the drop-down list, select the scripts to execute.
Note: You can select both Windows scripts and Azure Runbooks. In addition, you can drag and drop the scripts to change the order in which they are run.
Scripted actions input parameters: If necessary, provide the required parameters.
Pass AD credentials: Select this option to pass AD credentials.
AD Credentials: From the drop-down list, select the AD credentials to pass.
Once you have entered all the desired information, select Save or Save & close.